Yamaha PA2030A Power Amplifier

Yamaha PA2030A Power Amplifier


Specifications
Details

Lo-Z/Hi-Z switchable Class-D amplifier (Lo-Z: 30W x2ch, Hi-Z: 60W x1ch) equipped with 1 stereo/2 mono line inputs; can be combined with the MA2030a mixer amplifier.

General specifications PA2030a
Output power 1kHz (THD+N=1%: 3Ω) 30W x 2 (20ms Burst)
1kHz (THD+N=1%: 4Ω) 30W x 2 (20ms Burst)
1kHz (THD+N=1%: 8Ω) 30W x 2 (20ms Burst)
High impedance: 100V line 60W x 1
High impedance: 70V line 60W x 1
Total harmonic distortion ≤ 0.1% (Line in to Speaker out @1kHz, Half power, 3Ω/4Ω/8Ω), ≤ 0.2% (Line in to Speaker out @1kHz, Half power, 70V/100V)
Frequency response 0dB, -3.0dB, +1.0dB (Line in to Speaker out, 50Hz to 20kHz, 1W, 3Ω/4Ω/8Ω), 0dB, -3.0dB, +1.0dB (Line in to Speaker out, 90Hz to 20kHz, 1W, 70V/100V)
Crosstalk -
I/O Connectors Mic/Line Input -
Line Input -
Speaker Output Barrier strip x 2 pairs
Line Out -
Control ports -
Mic Input -
Stereo Input LINE IN: Stereo RCA pin (unbalanced), 3.5mm Euroblock (3-pin, balanced) x 2
Input Level Line input (unbalanced): -10dBV (Sensitivity), -10dBV (Nominal), +10dBV (Max before clip) / Line input (balanced): +4dBu (Sensitivity), +4dBu (Nominal), +24dBu (Max before clip)
Output Level -
Processors Speaker EQ (VXS:Full Range, VXC, VXS10S/ST), HPF (150Hz), LPF (150Hz, 200Hz)
Protection circuit Load protection Power switch on/off: Mute the output*, Output voltage protection: Compress the output*, DC-fault: Power supply shutdown (*Restored automatically)
Amplifier protection Thermal: Limit the output* → Mute* → Shutdown, Over current: Mute the output*, Integrated power limit: Compress the output* (*Restored automatically)
Power supply protection Thermal: Power supply shutdown, Over voltage: Power supply shutdown, Over current: Power supply shutdown
Amplifier class Class D
Cooling Conventional cooling, bottom to up airflow
Power requirements 100V, 120V, 230V-240V; 50Hz/60Hz
Power consumption 30W (1/8max. power, 3Ω, AC 100V, pink noise at all channels)
Dimensions W 215mm (8.5”) *1
H 54mm (2.1”) *1
D 288mm (11.4”) *1
Net weight 1.8kg (4.0lbs)
Accessories AC power cable, 3.5mm Euroblock plug (3-pin) x 2, Owner’s manual, Specification sheet
Options RKH1 (Rack-mount Accessory)
Certificate -
Others Operating Temperature: 0°C to + 40°C, Storage Temperature: -20°C to + 60°C, Rack-mountable when ensuring sufficient ventilation above and below the unit


View more about Yamaha PA2030A Power Amplifier on main site