Details
The Yamaha XMV4280 power amplifier can operate in both high-impedance (70V/100V line) or low-impedance (4Ω/8Ω) modes simultaneously, eliminating the need for additional equipment, as well as streamlining the installation process.
Installed sound applications often demand both high and low impedance connectivity in the same venue, requiring separate, dedicated amplifiers or an external transformer.
| Model: XMV4280 Specifications | |
| Output Power |
1kHz, THD+N = 1% (20 ms Burst) 4Ω:280W x 4 8Ω:280W x 4 4Ω/ Double Power Mode:560W x 2 8Ω/ Double Power Mode:560W x 2 |
| High impedance | |
| 100V line | 250W x 4 / 40 Ω |
| 70V line | 250W x 4 / 20 Ω |
| Voltage Gain | |
| RL=8Ω | 31.7dB |
| RL=8Ω / Double Power Mode | 34.7dB |
| 100V | 38.2dB |
| 70V | 35.2dB |
| Input Sensitivity | |
| RL=8Ω | +4dBu |
| S/N Ratio | |
| A-weighted | ≥ 100dB |
| Power Consumption | |
| 1/8 power (4 Ω pink noise) | 250W |
| Idle (4 Ω) | 37W |
| Standby | 18.5W |
| THD+N | 1kHz, half power: ≤ 0.2% |
| Frequency Response | RL=8Ω, 100V/70V, Po=1W, 20Hz - 20kHz 0dB, ±1.0dB |
| Crosstalk | 1kHz, half power, 8 Ω, Att. max, input 150 Ω shunt :≤ -60dB |
| Maximum Input Level | +24dBu |
| Input Impedance | 20kΩ (balanced), 10k Ω (unbalanced) |
| Connectors | |
| Analog Input | Euroblock x 2 (6P, balanced) |
| Digital Input / Output | RJ45 x 2 (YDIF IN / OUT) |
| Speaker Output | Barrier strip x 4 pairs |
| Network | RJ45 x 1 |
| Remote, Fault Output | Euroblock (3P) x 1 |
| AC IN | AC Inlet x 1 |
| Protection circuit | |
| Load Protection | POWER switch on/off: Output mute, DC-fault: Power supply shuts down, Clip limiting |
| Amplifier Protection | Thermal: Output mute (heatsink temp ≥90°C) (Restored automatically), Overcurrent: Output mute (Restored automatically), Low load impedance: Output mute (Restored automatically) |
| Power Supply Protection | Thermal: Amplifier shuts down automatically (heatsink temp ≥100°C) , Integrated power: Gain reduction (Restored automatically) |
| Cooling Fan | 3-Speed fan x 2, front-to-back airflow |
| Power Requirements | 100V, 120V, 230V-240V; 50Hz/60Hz |
| Dimensions | |
| W | 480mm (18.9") |
| H | 88mm (3.5") |
| D | 422mm (16.6") |
| Weight | 8.1kg (17.9lbs) |
View more about Yamaha XMV4280 Power Amplifier on main site