Details
VERSATILE AND DURABLE WORKHORSE ENGINEERED TO SATISFY ALL BUT THE MOST POWER-HUNGRY NEEDS.
TECH SPEC OVERVIEW
- Benchmark power density – The FP 7000 delivers a total of 7000 W (2 x 3500 W @ 2 ohms) in only 2U.
- Lab.gruppen sound quality – impeccable sonic performance standards with durability and greater efficiency
- NomadLink® network ready – Monitoring and control of key functions accessible via the intuitive DeviceControl software
- Patented Class TD amplifier topology – Road-proven output stage delivers Class B audio quality with Class D efficiency
- Regulated Switch Mode Power Supply (R.SMPS) – Output power remains constant even with significant drops in the mains voltage
- Efficient cooling system - Unique, lightweight Intercoller copper cooling system dissipates more heat to allow extended peak output
- Adjustable parameters - Selectable Gain, scalable Voltage Peak Limiter (VPL), and bridge-mode operation allow custom configuration for any application
- Comprehensive protection and warning – Excessive output current, DC, high temperature, very high frequency (VHF), short circuit, open load, mains fuse protection, and soft start
- XLR input connectors
- Heavy-duty binding post or Speakon output connectors
TECH SPEC
| Model | FP 7000 |
| General | |
| Number of amplifier channels | 2 |
| Peak total output all channels driven | 7000 W |
| Peak output voltage per channel | 155 V |
| Max output current per channel | 59 A peak |
| Max output power (all channels driven) | |
| 2 ohms | 3500 W |
| 4 ohms | 2800 W |
| 8 ohms | 1450 W |
| 16 ohms | 730 W |
| Max output power bridged | |
| 2 ohms | Not recommended 1 |
| 4 ohms | 7000 W |
| 8 ohms | 5600 W |
| 16 ohms | 2900 W |
| Performance | |
| THD 20 Hz - 20 kHz at 1 W | <0.1% |
| THD at 1 kHz and 1 dB below clipping | <0.05% |
| Signal to Noise Ratio | >112 dBA |
| Channel separation (Crosstalk) at 1 kHz | >70 dB |
| Input impedance | 20 kOhm |
| Output impedance @ 100 Hz | 19 mOhm |
| Gain, Sensitivity and Limiters | |
| VPL, selectable per ch | 155, 121, 101, 83, 70, 56, 47, 38 V |
| VPL, when bridged 2 | 310, 242, 202, 166, 140, 112, 94, 76 V |
| Voltage Peak Limiter mode (per ch.) | Hard / Soft |
| Amplifier gain selectable (all channels) – rear-panel switches 2 | 23, 26, 29, 32, 35, 38, 41, 44 dB |
| Default gain | 35 dB |
| Level adjustment (per channel) | Front-panel potentiometer, 31 position detented from -inf to |
| Connectors and Buttons | |
| Output connectors (per ch.) | Neutrik speakON |
| Input connectors (per ch.) | 3-pin XLR, electronically balanced |
| Output bridge mode | A+B - Ch. A is signal input source. A+B, C+D - Ch.’s A and C are input source |
| NomadLink network | On board, 2 x RJ45 connectors IN and OUT |
| Intelligent fans (on/off) | Yes, depending on presence of output signal |
| Power on/off and Remote enable on/off | Individual switches on front-panel |
| Cooling | Dual fan, front to rear airflow, no filter required, temperature controlled speed |
| Front-panel user interface | |
| Common | NomadLink Network; Power Average Limiter (PAL)4; Power on |
| Per channel | Signal present / High-impedance; -10 dB and -4 dB output signal;Voltage Peak Limiter (VPL); Current Peak Limiter (CPL): Very High Frequency (VHF); High temperature; Fault; Mute |
| Power | |
| Operating voltage, 230 V / 115 V nominal 3 | 130-265 V / 65 -135 V |
| Minimum power-up voltage, 230 V / 115 V | 171 V / 85 V |
| Power Average Limiter (PAL) 4 | Yes |
| Soft-start / Inrush Current Draw | Yes / max. 5 A |
| Mains connector | 230 V CE: 16 A, CEE7; 115 V ETL: 30 A Twist lock |
| Dimensions | |
| Dimensions | W: 483 mm (19”), H: 88 mm (2 U), D: 396 mm (15.6”) |
| Weight | |
| Weight | 12 kg (26.4 lbs) |
| Finish | |
| Finish | Black painted steel chassis with black painted steel / aluminum front |
View more about Lab Gruppen Power Amplifier FP7000 on main site